# 3D Printer Profile Changes from Standard profile: Wall Line Count: 2 -> 3, increase strength and shape Outer Wall Wipe Distance: 0.0 -> 0.1 mm, hide z seam Printing temperature: 200 -> 210 C Combing mode: All Support Overhang Angle: 65 deg Support density: 20% -> 10% Support X/Y distance: 0.8 -> 1.5 mm, avoid generating support in horizontal M3 holes Build plate Skirt line count: 3 -> 2, save filament, faster printing --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://tk233.gitbook.io/notes/mechanical/3d-printer-profile.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.